Description

Water Conservation Made Easy

With the Bio Energy Water Saver, the watering is reduced by 60% or more. In many case studies the irrigation needs could be reduced by 100%.

Installation

Installation involves a very easy Do-It-Yourself procedure. All you need to do is put our Bio Energy Water Savers in the ground and create 2m distance between each Bio Energy Water Saver. Let soil adjust to Bio Energy Water Savers for a period of three months, reduce water gradually and start to enjoy 60% water savings in no time. We recommend that irrigation water reduction should be done gradually to monitor soil’s reaction to the withdrawal process. We also strongly recommend that the 3-month waiting period should be maintained so that the ground can adjust to the new process and get accustomed to the sticks as sticks need a period of 90 days to be able to successfully change the energetics of the ground for better water absorption.

Beyond the great savings you benefit from using our Bio Energy Water Savers, some positive side effects may arise:

– Grass may become greener
– Amount of produce may grow bigger and quality of produce may become better.

 

 

 

 

How does this happen?

Sticks application transforms the ground/soil capability and increases ground’s ability to absorb air humidity via a bio-energetic effect. The more moisture the ground absorbs, the lesser its dryness and the higher the chances of reaping a better and more fruitful harvest

Effects are usually noticed within 2 to 3 months and water saving increases to 60%; this saves you the extra time and cost of irrigation by up to 60%.

The Bio Energy Water Savers work effectively in a ground area of 4m² (i.e., a distance of 2m should be put between the Bio Energy Water Savers for the best results.

So if there is a 400 square-meter large property, 100 Bio Energy Water Savers would be needed.

Depth of insertion of the sticks in the ground greatly depends on what you want to do with the field/lawn/meadow.

 

Lawns and meadows

For Lawns and meadows, an insertion depth of 10 cm is recommended

Crops Fields

For Crop fields, an insertion depth of 20-30 cm is recommended to ensure that sticks are deep enough to withstand erosion and to avoid dislodgement/uprooting during plowing.